Day: November 3, 2022

In jet printing, dust from the environment or the surface of the carton may adhere to the surface of the nozzle hole and cause the

Repair and Maintenance Cartridge storage 1. Cartridges should be stored at room temperature (the ambient temperature of the printing system) with a deviation of ±5°C.

The most common thing is that the nozzle is blocked. This needs to enter this system first. There is a nozzle to clean: below: When

First select this user field, in the menu, then confirm that there are editing user fields, new user fields, deleting user fields, resetting counter, etc.,

Select the information, select the second information parameter, and then determine: The first is width. The default is 4. If you want to wider, when

First enter the language interface: Looking down from above, there are so many languages:

Press the direction key, select the delete message, and press OK, you need to select which information is deleted: However, the information currently printed cannot

First, select the information in F2 and press OK: The information content will be displayed here. If you want to modify the current information: Press

First press the direction key to the left, select the information, the first is to select the information second information editing.Select this new information and

First, turn on the machine: Then open the nozzle cover. There is a nozzle block here. Remember to take it down. Open the bottom“ ⚪”