The first one is the status. If it is, we will tick √ because we currently have no faults After we clicked in, it still showed
Let’s take a look at the Citronix CI3000, its parts, and disassembly and assembly: Then we open the front lid Here are the board’s lines: This
Let’s take a look at the Citronix C13000 series of machines ,whose accessories are disassembled. We need to unplug all the lines on the motherboard. When we disassemble
To remove the high-voltage package, first unplug the wires at both ends of the high-voltage package. Then remove the screws, and the high voltage package
Let’s take a look at how the fan is removed. There are four screws on the fan. Let’s remove the four screws. The fan has
This stainless steel filter is called the ink supply filter, which is connected to our this ink supply pipe. If we’re going to tear it
Let’s look at if the main ink box is removed, sometimes, our valve here we are not easy to remove. If we want to get
How to remove this throat, a brief talk. Then we use the big activity wrench, stuck it in this position and spin down. We just
Under normal circumstances, the new machine for ink for the first time to see how to operate. A new machine that has not been installed.
Let’s look at the Citronix CI5300, the 5000 series machine, and how to replace its main filter. First of all, we click the menu, there
I first unplug the filter, there are buttons on both sides, we press the filter. After the filter is removed, there are four screws, and
Let’s look at the ci3200ci3300 machine, just received the machine, and then how to give the ink for the first time. This one is slightly
Let’s take a look at how the Citronix ci000 series machine just received. First, we turn the power button on. The screen then reaches the main
Take a look at the common faults. The most common is the nozzle blockage, which is divided into two situations. One is completely blocked, is
Citronix ci5300 machine its nozzle cleaning how to wash. Then let’s take a look, first we have a punch back, let’s have a punch back. There
We need to open this software Let’s open the editing software Then we create a new one and click on ‘New’ Then select the type of machine we
Let’s test printing before starting spray printing. We can set this to a stopped state And then we’ll take this test Then we take a piece
Click I press it once and it starts flowing, that’s all Pay attention not to wipe the nozzle area with a cloth as it is particularly
If it’s not turned off, let’s stop it first and press this button to stop it readiness Then we can turn it off by clicking
This is a bracket for the nozzle cable Data cable Print head controller Anti-collision device Power line CD and instruction manual This is photoelectric Controller
Firstly, this is the installation of the four corners at the bottom. Just like us, I have already installed it. It’s paired together, install these
First of all, we need to fix the two screws on the side here There are also two screws on the opposite side that need
Click on this menu and then click on Set Language And there are only two languages here, English and Chinese. Normally, the default is always English
One-stop Coding Industry Solution
Make Coding Easier