Month: August 2023

Let’s put the ink tank here first: Put the solvent tank on this side: Then pour about 1.2 liters of ink into the ink tank,

Let’s show you how to clean the A120 machine and replace its multiple filters. Let’s go into this interface and enter the advanced service password

n the power-on interface, then press the wrench key, enter the primary password, the primary password is SERVICE. Then press and hold the green key

Take a look at how the machine will supply ink for the first time after it is received. Let’s turn on the machine first. If

If it reports a high-voltage fault, let’s first look at whether there is ink on the high-pressure deflection board, if there is ink, we use

We’ll start by checking the charging tank, which has ink on it, and we’ll mainly see if there’s any ink in this gap: If there

First, we enter the advanced password: press the wrench key and then enter the advanced password Advanced Service Password CHAUCER After entering the advanced password,

If there is a high voltage fault: If it reports a high voltage fault, first we check our high voltage deflection plate,Is there anything dirty

There are three possibilities for recycling failures: The first type is nozzle blockage: if the nozzle blockage causes it, we need to clean the nozzle.

First, let’s click on this setting To set it up, let’s click on the wizard below. There is a nozzle cleaning here, which can only