Let’s take a look at the 9232 machine menu explanation.First let’s look at one of the ICONS on this side.
This is an icon that says we can see a speed of this operation.It’s just a parameter.A parameter for the normal operation of a machine.Stress,Jet speed Ink line speed,Rotational speed viscosity,there is also a recycling value and so on.You can see it all over here.
If our machine alarms,and you can see over here that it’s going to turn yellow.The warning turns yellow here.If the fault alarm is red.
We’ll check it if we want to see it.Check and you can see.So if you want the machine to start,we test print,you can also print here.
Then what,our side is one part of a message.A name of the message followed by a content of the message.
Then there is the information an editor creates changes and so on and parameters.Here is a modification of the information.Here is a creation of information.Creating this can be modified.
This tool and this password.Enter the password. This is boot.And then here’s a usage of our background.
Then we look at the tools.Tools which are often seen in this say.There’s language. Here we hit Set here.
You can change the date.There’s language here, too.
Configurable language.The setting language is here.
Let me show you what we usually use.I won’t talk about the ones I don’t use often.And ours.
Inside,this is the one we use most often.That’s when the machine malfunctions.Recovery fault,High voltage fault,and so on and so forth.It’s my usual glitch.It’s all sorted out in here.Of course I said the hardware is not broken.Nozzle clogging,Ink line deviation,Ink dots don’t split well,they all have to be modified in here.We can clean the nozzle, open the nozzle, solvent inhalation and ink line adjustment and so on.It’s all in here.Press the ink line to open or close.Go in this way.You can also see one of our parameters here.
There are no important explanations in the service.
Here is a common side of the discharge and cleaning, that is, we clean the ink pipeline.We can do that over here.
System directory .Here we can test the electronic valve.The electronic valve is in here.
There’s also a masking glitch.
There are three shielding failures.Nozzle cover fault, recovery fault,there’s also a speed glitch.You can screen it out over here.
The MI engineer here means a factory setting.RC maintenance and more.Failed test.That means hardware testing,touch screen test,set right.This is a simple one menu explanation.
