Let’s look at the assembly of the Videojet 9550 machine. First of all, we put the display screen in here. Go to our position, have the screw below, and fix it up.
Then we put the drum in this position.
And then you put it here like this.
Then we label wound words. There is a drawing here, and each machine is here. If we do it, follow this drawing. Then we label it wrapped like this. And then you go through our axis.
Then to the top and then down.
Then come from below
Under this glass head, from under the glass head, and then down, down this.
Then go directly to our collection part, the collection is also called label paging flow.
We all have directions on this side. We this this start from here, from the top down, from the top exchange. When we go to the scrap shaft, then we rotate clockwise from above; not from here, not counterclockwise.
And then our ribbons are the same. Install our ribbon on our ribbon supply shaft. You see we have signs here, it’s the same, come out from above.
And then go under our nozzle. And then you go back to the top.
And then to our ribbon scrap shaft, also from the bottom of the shaft. Just like this, we’re going down from below the axis, from above the axis, and holding it down. Then this is the whole assembly of the machine.
