Drain the ink first. Run the ink pump, then unplug the ink supply tube and insert it into the waste bottle to drain the original ink clean:
Then wash again, then run the ink pump, let it circulate, we run the ink pump for about ten minutes, and then we turn the machine on, and then let it recycle for about 20 minutes, that is to say, every time you wash to cycle for 20 minutes. After the cycle, we press the machine’s stop button, and then we drain the waste liquid out again. Wash four times if maintained.
After cleaning the machine four times, the lines have been thoroughly washed.
Then we replace the main filter, as well as the solvent filter, and the recycling filter with a new one, loosen the filter and tighten it with a new one:
