Let’s look at a presentation of the Videojet 9550 labeling machine and its accessories. First of all, we call it a controller.That’s called a clarit display, or a controller.
Let’s have this one below, which is called the label scrap shaft. It is the label scrap axis for collecting collection.
Then this is called the label consumables plate, which is the feeding plate.
This side is a ribbon, the ribbon.
This one is called a glass head. It’s from the package label. This flashing light is called an LED light.
Then the ribbon has an axis on this side. This shaft is called the ribbon supply shaft, and the ribbon is installed here.
This is the collection, ribbon, this is called ribbon waste shaft, waste collection.
Then these two black ones are called shaft locks. This can rotate, open, lock, open, lock.
This paper is called a label, and this is our label.
This is movable, called the elastic adjustment arm.
The following below is the nozzle.
This axis and this axis are fixed axis, fixed marking machine for use.
Then we have several holes on our side. In fact, there are instructions here. And then let’s look at what are the above two? Is two network cable network ports.
This is the socket on the clarit display.
This is the encoder.
This one is a serial port.
Input and output ports.
Both of here are interfaces for product detection. It is the photoelectric socket, which is photoelectric 1 and photoelectric 2 respectively.
And then this one is the signal light, which is used for connecting to the signal light.
Wheels, rollers.
