Author: Cheef

Maintain the ink box Ink box storage Clean the ink box Before reinserting the cartridge, or printing the image becomes significantly worse, cleaning the ink

First, click on“ Job“. This is the good “Job ” already created. Click “+” to create a new message. Create a name for this information,

Maintain the ink box Ink box storage 1.The ink cartridge shall be stored at room temperature. The temperature of 18-25°C and a relative humidity of

Method1: Simple CIJ software and the previous VJ1000 series is very different, in the solenoid valve troubleshooting can not be done and VJ1000 series models

The Simplicity CIJ allows you to use the Drawing pad for a Windows PC, without using any special tool, and download the Logo file to the

Simplicity CIJ models may encounter display-related problems during use, generally showing the following problems: The screen is stuck, and the button does not respond. Occasionally unable

Since the ink replacement procedure is performed through the “Tools> Maintenance> Empty and clean the System” menu option, it is not available for VJ1240 models.

In jet printing, dust from the environment or the surface of the carton may adhere to the surface of the nozzle hole and cause the

Repair and Maintenance Cartridge storage 1. Cartridges should be stored at room temperature (the ambient temperature of the printing system) with a deviation of ±5°C.

The most common thing is that the nozzle is blocked. This needs to enter this system first. There is a nozzle to clean: below: When

First select this user field, in the menu, then confirm that there are editing user fields, new user fields, deleting user fields, resetting counter, etc.,

Select the information, select the second information parameter, and then determine: The first is width. The default is 4. If you want to wider, when

First enter the language interface: Looking down from above, there are so many languages:

Press the direction key, select the delete message, and press OK, you need to select which information is deleted: However, the information currently printed cannot

First, select the information in F2 and press OK: The information content will be displayed here. If you want to modify the current information: Press

First press the direction key to the left, select the information, the first is to select the information second information editing.Select this new information and

First, turn on the machine: Then open the nozzle cover. There is a nozzle block here. Remember to take it down. Open the bottom“ ⚪”

Click “Printer Settings” Click on “Language.” Videojet1580 machine interface language Settings, as well as input method input language, we can set a variety of languages

Take a look at the information editing of the Weidic 6330 machine, first open this software: There are language choices here, so there are so

Replace the language in the tool: Then enter the settings, point control, there will be language settings: There are so many languages to set up:

Click this switch to turn on: Then now is offline, the lights are also red lights. When you click, the red light will turn into

There are two ways to connect. One is the separation of the power module and the controller. The data cable needs to be used. First

There is a button here, pressing it down will open the door: Then pull out: Then you can see its entanglement method, and the trend

Let’s talk about the main interface. From left to right, the product counting, printing count, total printing, total running time; the percentage of the solvent