To remove the ink shunt, we first unplug the relevant lines:
The viscometer has two tubes, and we remove this tube:
Let’s install the front baffle first, First install the left side and put it in:
When installing solenoid valves, these holes do not confuse, if installed wrong, will leak ink:
Install the six valves first:
Just blow from above and there will be cleaning fluid down below it, indicating that the pump is clear:
First of all, the ink should come from the pipe on this side of the main ink tank:
On the main interface, we press the wrench key:
First we need to light up the screen. Here’s an open key, press and hold for 3 seconds without releasing, the machine will boot:
Machine parameter adjustment: Look at how the pressure and modulation voltage are adjusted. First press the wrench key:
In the power-on interface, then press the wrench key, enter the primary password, the primary password is SERVICE. Then press and hold the green key
Take a look at how the machine will supply ink for the first time after it is received. Let’s turn on the machine first. If
Let’s put the ink tank here first:
There are four holes in the base for mounting this column:
First select “Main Menu” in the screen and press Enter:
There’s a button under the console, and we press it down:
I. Ink discharge Remove the screw of the ink supply pipe of the printing module of the nozzle, and then put it on the waste
How to install the valve module? First of all, we install the solenoid valve, the washers above the solenoid valve must not be missing:
The adjustment ink line has two directions, one is to the left or right:
In the “Message Parameters”, select “Product Delay”, we can increase or decrease it according to the position of the printed product:
Select “Nozzle Flush” here:
If printing two lines of words will be missing half, we open the nozzle cover, and then find the recycling tank hanging ink, how to
We select a black-and-white picture, open it, take a screenshot of the picture, depending on the size of the image content:
We look at the installation of solenoid valve, installation to see if the solenoid valve washers are missing, must not be missing, otherwise it will
One-stop Coding Industry Solution
Make Coding Easier