There are two ways to connect. One is the separation of the power module and the controller. The data cable needs to be used. First

There is a button here, pressing it down will open the door: Then pull out: Then you can see its entanglement method, and the trend

Let’s talk about the main interface. From left to right, the product counting, printing count, total printing, total running time; the percentage of the solvent

First of all, create a new information, and order the homework first: Click this plus key to name the information: Then you need to insert

Replace the language in the tool:Replace the language in the tool: Then enter the settings, point control, there will be language settings: The first one

Now it is the Chinese interface, here are the print files, print frequency, current count, and switch language point settings:

With a total of four nozzles, this is the usage of the four cartridges. Because it is not turned on, the ink cartridge is not

Don’t use brute force when installing the cartridge, install it gently.

After the ink cartridges are installed, let’s see how the machine works. It is now off.

Click on settings.

Product: 6230 Topic: Overview of troubleshooting guidelines for E3334 or E3337 failures: There are many possible causes for “E3334 Printhead Actuator” or “E3337 Printhead Actuator

First, wipe the cartridge with a lint-free cloth in one direction, don’t rub it back and forth.

1.How to remove the pressure pump of the Videojet 1000 series printers？ Unscrew the screw above the cover.

Install the sprinkler. The machine has a total of four nozzles, no matter how many nozzles there are, the installation method is the same. Fix

Install the two fixing blocks on it, and install the screws on both sides  

In the disassembly and installation, there are three large pieces, you need to pay attention to the ink core, pay attention to this joint, it

After the Videojet 43s ink is drained, add about 500ml of cleaning solution to it for cleaning, cleaning for about 20 minutes, need to be

1. How to install the ink core Remove this thing first, and then remove the two screws on the side. After removing the part of

Remove the main filter

I. Ink discharge Remove the screw of the ink supply pipe of the printing module of the nozzle, and then put it on the waste

First remove the cover: