Category: Citronix

If our charging tank is removed, there is only a screw on it, and then we directly loosen the screw, and then pull it out,

Let’s change this one. It’s called a phase amplifier, also called a phase detector. Let’s see how it’s torn down. We first have to remove

This is the print head hand tightening screw. This is the protective cover for the print head. This is the print head back cover. Remove

Let’s take a look at the Citronix CI3000, its parts, and disassembly and assembly: Then we open the front lid Here are the board’s lines: This

To remove the high-voltage package, first unplug the wires at both ends of the high-voltage package. Then remove the screws, and the high voltage package

Let’s take a look at how the fan is removed. There are four screws on the fan. Let’s remove the four screws. The fan has

This stainless steel filter is called the ink supply filter, which is connected to our this ink supply pipe. If we’re going to tear it

Let’s look at if the main ink box is removed, sometimes, our valve here we are not easy to remove. If we want to get

How to remove this throat, a brief talk. Then we use the big activity wrench, stuck it in this position and spin down. We just

Under normal circumstances, the new machine for ink for the first time to see how to operate. A new machine that has not been installed.

Let’s look at the Citronix CI5300, the 5000 series machine, and how to replace its main filter. First of all, we click the menu, there

I first unplug the filter, there are buttons on both sides, we press the filter. After the filter is removed, there are four screws, and

Let’s look at the ci3200ci3300 machine, just received the machine, and then how to give the ink for the first time. This one is slightly

Let’s take a look at how the Citronix ci000 series machine just received. First, we turn the power button on. The screen then reaches the main

Take a look at the common faults. The most common is the nozzle blockage, which is divided into two situations. One is completely blocked, is

Citronix ci5300 machine its nozzle cleaning how to wash. Then let’s take a look, first we have a punch back, let’s have a punch back. There

Drain the ink first. Run the ink pump, then unplug the ink supply tube and insert it into the waste bottle to drain the original

The most common is nozzle blockage, which can be divided into two cases. One is completely blocked, that is, when the machine starts up normally,

Then we look at the charging fault, we first need to look at the parameters, that is, whether the viscosity is right, whether OK is

The poor printing effect is that we print a line of words, only half printed out, or two lines of words, only printed out a