Let’s take a look at the 9232 machine parameters.An adjustment,Parameter adjustment here.We’re revising it.
Parameter adjustment.
There’s the first one in here.The direction of the single arrow and we pick it, there are four directions.
Let’s pick one.We have four directions.There’s got to be one that works for us.
And then there’s a line speed down there.
The speed of the production line must match the speed of our real production line.If we’re running at 50, we’re going to fill in 50.So if we’re running at 50,what happens if I fill in 200 here？Just say we typed the original edit.Normally, it’s 5 centimeters long.Input different values can be as little as one centimeter long..The message is shorter when typed.Because the bigger the value is,the faster the print.The faster the print,and then the shorter the message length.The smaller the value,So we’re saying the longer the print.Draw out.He had a choice between 1 and 25,000.This is the print speed.
And then there’s a speed test.
This speed has an encoder mode in it,with fixed speed.So we normally use a fixed speed.If we use an encoder we choose an encoder.No encoder, We use a fixed speed.And then click OK.
Then what,there’s a delay down there.Let’s talk about delay.Positive delay and negative delay,they’re worth the same.This affects our printing in a position to the left or right of the product.Select the printing location according to the requirement on site.Specific to their own according to a situation on the scene to adjust the content of this information.This is the parameter explanation.
