Let’s take a look at the Citronix C13000 series of machines ,whose accessories are disassembled.
We need to unplug all the lines on the motherboard. When we disassemble the accessories, we must wear anti -static gloves, and we remove the lines on the motherboard one by one.
The wire of the power supply is also removed and the line of the voltage package.
After we removed these cables, we then remove the screws on the motherboard.
Note that there is a row on the back of the motherboard so that the motherboard has been removed.
Then we look at the screen, how to disassemble the PC board. The disassembly of the PC board is relatively simple. After removing the motherboard, we remove the four screws, and the PC board can be removed.
We have dismantled the PC board, that is, Ping Mu. If we want to replace the naipot, you can also tear it off.
Then when I install a new keyboard, install the lines first, then stick it, and put it with one -to -one correspondence. If the keyboard is replaced, you must remove the motherboard or not be able to replace it.
The motherboard and display we put them on them now. How to disassemble them and press them on, and install the display screen first.
Plug the keyboard line and put it on the screw of the motherboard.
After we install the motherboard, install the lines one by one.
Then insert the power cord, and there is a photoelectric line.
In this way, the motherboard is installed.
This is the disassembly of the motherboard and display.
