| 1.What format to print logo file |
| Answer: PLT format |
| 2.Turn on the power switch and no light will come out |
| Answer: 1. The board is damaged. 2. The power supply of the laser is damaged. 3. The laser mode selection in the setting is wrong |
| 3.What are the components of a general flying laser? |
| Answer: laser, galvanometer, factory mirror, host, controller, board card, board card power supply, galvanometer power supply, red light power supply, laser power supply, column, cross arm, base, controller bracket, encoder, photoelectric and photoelectric bracket, etc |
| 4.How large is the general galvanometer? |
| Answer: 100 * 100mm |
| 5.What is the general maximum power setting? |
| Answer: 85-90W |
| 6.How much volt is the red power supply? |
| Answer: 5 v |
| 7.What is the power supply voltage of the laser? |
| Answer: generally 24v-48v |
| 8.No fault display, no printing |
| Answer: 1. The eye is not adjusted or damaged 2. The code spraying mode is selected incorrectly 3. The encoder is damaged |
| 9.Very light on machine printing products |
| Answer: 1. The power is too small 2. The focus is not adjusted properly 3. The speed is set too fast |
| 10.Typing confusion |
| Answer: 1. Wrong selection of printing direction 2. Idling and slipping of encoder 3. Printing speed is too slow |
| 11.Turn on the host and wait for it to be on, and the black screen of the controller will not be displayed |
| Answer: 1. The cable from the controller to the host is loose or damaged 2. The controller is damaged |
| 12.The host and controller do not work when the machine is turned on |
| Answer: 1. Check the plug-in panel and power cord 2. Check the power supply of the laser |
| 13.How long does CO2 laser usually take? |
| A: 20000-30000 hours |
| 14.How long does a fiber laser last? |
| A: about 100000 hours |
| 15.Print product yellow? |
| A: too much power or too slow |
| 16.What industries are CO2 laser generally used in |
| Answer: carton, pipe, wood, medical packing box, cable, etc |
| 17.What industries are fiber laser generally used in? |
| Answer: food packaging bags, stainless steel, cosmetic bottles, pipes, cables and other industries |
| 18.What fonts can the laser print? |
| Answer: single line font, fill font (double line font), dot matrix font |
| 19.What information can the laser machine print? |
| Answer: Chinese and English, number, barcode, QR code, variable date, count, random code, graphics, etc |
| 20.What languages does the laser support? |
| A: Chinese, English, French, German, Korean, Korean, Thai, Spanish, Portuguese, Arabic, Russian, etc |
| 21.Correct adjustment method of electric eye |
| Answer: adjust the electric eye up and down. When the product passes through the electric eye, the electric eye light is on. The product is not out of date and the light is off |
| 22.How do I play in flight mode? |
| Answer: 1. First, adjust the focal length and product printing position, 2. Adjust the power, and make a static one to see the effect. 3. Then adjust the optical fiber. When the product is detected, the light is on, but the product light is not detected to be off. 4. Change the code spraying direction to the correct direction (consistent with the moving direction of the conveyor belt). 5. Place a product to adjust the speed and delay until the product passes the desired position |
| 23.How to adjust the delay? |
| Answer: if the time delay is too small, it will print the front of the product’s printing position. If the time delay is too large, it will print the back of the product’s printing position. The time delay will increase or decrease by 100 units, until the product passes the desired position |
Menu
- sales@cheef.cn
- +8618168575767
