Day: July 27, 2023

First, let’s take a look at which type of recycling fault it is If the ink line hits the recycling tank and it reports a

No flight time, flight time is 0 We need to use a magnifying glass to see how the dot splits And let’s take a look

First, turn on the nozzle and see how it splits. If there is a high-voltage fault, let’s check if there is ink accumulation on the

First, drain all the ink from the ink tank. If it comes out, we need to unscrew the lock of the buffer. After spinning it

If you want to replace the service module, it is in the maintenance section. There is a replacement service module here It is now gray

If you want to replace the service module, it is in the maintenance section. There is a replacement service module here It is now gray

If you want to replace the service module, it is in the maintenance section. There is a replacement service module here It is now gray

This is the throat and nozzle: Open the nozzle cover, from left to right are nozzles, high -voltage deflection boards and recycling slots: Cover with

Now is the Arab language, enter the menu first: Find language: You can change the interface language in it：

Select the second folder option: There are selection information, editing information, new information, and selecting new information: You can see a text box and a

First, open the ink lid and the solvent cover. In the ink tank in the ink tank, not less than 500 ml of ink, the

Printing settings can be adjusted here: There are delayed printing and printing width and height, you can adjust it as needed: here: After the adjustment

First switch the language to Arabic, select it in the menu, select the settings and then press to confirm: In the installation configuration: Choose Arabic